Audiocenter TS12 Active 12" 2-Way with DSP-Beyma drivers (Single) – SoundWarehouse

Audiocenter TS12 Active 12" 2-Way with DSP-Beyma drivers (Single)

R 9,600.00 R 12,800.00

The Audio Center TS12 is a self-powered full-range speaker system that with a custom 12 "Beyma LF driver with 3" voice coil and 1 "HF driver from Custom Beyma with 1.75" voice coil is fitted. Onboard DSP is designed for optimized adjusted to the speaker components and high power reserves. These features of the DSP at five different presets that can be activated by touch switch depending on the application.

The 1 "HF driver is 60 ° DMF TM -Horn mounted on a patented 90 ° x. The design of the horn allows a 90 ° rotation so that the radiation can be adapted to the horizontal or vertical Einsatzart problems. Thus, even if the horizontal use of the speakers from a wide sound dispersion to be realized when the horn is rotated by analogy, by 90 °.

The 12 "bass / Mittentontreiber is specially optimized to reproduce a low resonance and balanced sound. Since, in practice, offering use with powerful bass support, the TS12 was adjusted slightly dominant high frequency range. So an impressive overall result with excellent power efficiency can be realized ,

The housing of the TS12 is sealed from high quality marine plywood and standard with black lacquer. On the edges of the top and bottom is a stable rotating rubber band that not only has a protective function, but can also be used as an anti-slip Stand.

The front side of the speaker and there built components are protected with a robust and impact-resistant metal grid, which is backed opaque with a stylish acoustic foam in enclosure color.

For mobile use a grip on the top and two more have been added to the sides of the TS12. The cabinet is equipped with a total of 10 x M8 thread for optional mounting or eyebolts. Like all TS series full-range systems has also TS12 over a double 35 mm pole mount - one for the 0 ° position and the second extra for an inclination of the head's at 10 °.

The integrated 1,200-watt amplifier incl. DSP has two line inputs (one channel can be switched to microphone level) and an additional AUX input via RCA connectors. In the output section two Neutrik XLR male connectors are available, the channel 1 and channel 2 and can output 1 + 2 (Mix function) and channel 2. Thus, this system can be used for simple sound without an additional mixer.

The overall design of this system qualifies this model as "all-in-one" solution for professional users, whether touring or installation.


  • professional self-powered, full-range system
  • rotatable, patented 90 ° x 60 ° horn as DMF TM with high mechanical stability
  • solid and advanced mechanical processing guarantees a long life cycle
  • equipped with a modified 12 "LF / MF driver Beyma with a 3" voice coil and a 1 "HF driver Beyma with a 1.75" voice coil
  • incl. DSP with five preset memory locations and an activatable standby mode to save precious power and money
  • can also be used as a non-slip Stand - surrounding rubber protection at the edges of the top and bottom
  • double pole mount with 0 ° and 10 ° position
  • 1,200-watt amplifier with simple standard mixer functions - two inputs and two outputs, one input channel switchable to mic level


Technical Specifications
Type: Compact, self powered 2-way speakers with integrated DSP
Components: 1 x 12 "Custom Beyma with 3" voice coil and 1 x 1 "Custom Beyma HF driver with 1.75" voice coil
Frequency response: 45 Hz to 20 kHz (+/- 3 dB)
Crossover: integrated via DSP, low- and high-pass
Sensitivity: 98 dB (1 W / 1 m)
max. SPL: 131 dB (1 m)
Coverage: 90 ° x 60 ° (H x V)
Processor: 96 kHz sampling rate, 56 bit resolution
Amplifier Type: RF Driver - Class AB, LF Driver - Class D
Power output: 1200 watts (AES Standard)
Transmission range amplifier: 20 Hz to 20 kHz (+/- 0.5 dB)
Distortion: less than 0.05%
Protection circuits: DC protection, short circuit, overheating, overload, soft-start function, overload and underload
Show on back: Power-On LED, signal A and signal B-presence LED, limiter status and protection status LED
Indicators on the front page: Status LED for standby function on / off (blue / red)
DSP functions: Volume Input A and Input B, selecting a preset (factory setting, Linear, Boost, Vocal, w / sub) channel A / B-Link function, standby function (off, 2, 5 or 15 minutes)
Inputs: Line In A Neutrik XLR / TRS combo jack (switchable between mic and line level), Line B-in via Neutrik XLR / TRS combo jack, stereo RCA as an AUX-in
Outputs: Line B output via Neutrik XLR male, Mix Out A or A output (switchable) via Neutrik XLR male
Hardware: 35 mm pole socket, 3 x Trageriff each on the top and two sides, rotating guard band of rubber on the edges of the top and bottom - in Casing Color
Air / mounting points: 2 x M8 thread on top and 4 x M8 thread on each side
Body: CNC machined multifunctional multiplex housing with road-compatible finish in black
Dimensions: 358 x 633 x 326 mm
Weight: 23.5 kg
Matching Subwoofer: Audio Center TS118-SW, TS212-SW or similar