Turbosound Milan M15 1,100-Watt 2-Way 15" Powered Speaker (Single) – SoundWarehouse

Turbosound Milan M15 1,100-Watt 2-Way 15" Powered Speaker (Single)

R 10,990.00 R 13,190.00

A Class-D powered speaker that can be used for a variety of PA applications in both portable and installed scenarios. It features 2 independent input channels with mic and line inputs as well as a 2-band EQ and intelligent limiting. A mix output connector allows you to connect to other Milan series loudspeakers.

Its processing is powered by the integrated Klark Teknik DSP and has an electronic crossover. A low-cut filter at 100 Hz allows you to use the M15 as a wedge monitor, but it can also be pole mounted or flown for a variety of placement options. Its trapezoidal enclosure is constructed from high density polypropylene and is designed to reduce resonances internally. It features a recessed handle for carrying.

2-way full range powered loudspeaker for portable PA and installation applications
1,100 Watt power featuring Klark Teknik Class-D technology
Klark Teknik Digital Signal Processing for total system control
High excursion 15-inch low frequency driver with low mass voice coil for transient response
1-inch high temperature dome compression driver with extended high frequency reproduction
Converging elliptical waveguide provides wide dispersion and excellent pattern control
Speech/music switch featuring optimized equalization for voice or music applications
Switchable 100 Hz high pass filter for subwoofer integration
Lightweight composite enclosure with black finish
Rugged powder coated perforated steel mesh grille
Dual angle pole mount for accurate audience coverage
Multiple internal rigging points for installation applications
Components LF Driver: 1x 15" (381 mm)
HF Compression Driver: 1x 1"(25 mm)
Frequency Response 45 Hz to 18 kHz, +/-3 dB
40 Hz to 20 kHz, +/-10 dB
Nominal Dispersion 90° H x 60° V @ -6 dB points
Maximum SPL 130 dB, peak
Construction Injection-molded polypropylene enclosure
Recessed carrying handle
Integral dual-angle pole mount socket
6x M10 threaded internal rigging points
Grille Powder coated galvanized perforated steel mesh grille with foam backing
Connectors Mic/Line Input: XLRF/TRS combo jack, wired pin 2 hot
Mix Output: Male XLR wired pin 2 hot
IEC mains connector with integrated fuseholder
Controls Level, Line/Mic, Low Cut, Speech/Music, Bass and Treble, Front LED, Mains on/off
Indicators Blue Power LED
Green Signal LED
Red Limit LED
Red Clip LED
Amplifier Type: Class D
Maximum Power Output: 1,000 W (LF) ; 100 W (HF)
Input Sensitivity: -32 dBu (Mic), -2 dBu (Line)
Microphone Input Impedance: 560 Ω unbalanced, 1 kΩ balanced
Line Input Impedance: 20 kΩ unbalanced, 40 kΩ balanced
EQ: Bass +/-6 dB @ 80 Hz, Treble +/-6 dB @ 12 kHz
Amplifier Protection: Full short circuit, open circuit, thermal
Mains Voltage USA/Canada: 100-120 V~ (T 6.3 A H 250 V)
UK/Australia/Europe: 220-240 V~ (T 3.15 A H 250 V)
China: 220-240 V~ (T 3.15 A H 250 V)
Japan: 100-120 V~ (T 6.3 A H 250 V)
Power Consumption 140 W @1/8 max power
Dimensions (HxWxD) 28.3 x 18.0 x 14.5" (719.0 x 457.0 x 14.5 mm)
Weight 60.9 lb (27.7 kg)
Packaging Info
Package Weight 70.8 lb
Box Dimensions (LxWxH) 36.0 x 22.0 x 19.0"